The Basics Of Changing Gears
With a little practice, changing gears can be as intuitive as pedaling. Here are six things to remember.
With a little practice, changing gears can be as intuitive as pedaling. Here are six things to remember. By Neil Bezdek
1. The Gears
Most bikes have two or three chainrings in the front and anywhere from 7 to 11 gears, or cogs, in the back. Moving the chain from the smallest rear cog to the largest eases your pedalling effort incrementally. Moving it between the chainrings in the front results in a more noticeable change — pedalling feels easier in a smaller chainring and harder in a bigger one.
2. Shifter Savvy
The left-hand shifter changes the front gears; the one on the right controls gears in back. If you get flustered on the fly, remember: RIGHT = REAR.
3. It’s Okay To…
• Use only the rear cogs and the small or middle front chainring when you’re just getting comfortable on a bike.
• Look down to see what gear you’re in.
• Shift whenever a more experienced rider does.
4. When to Shift
The reason bikes have gears is so you can pedal (relatively) comfortably no matter what the terrain. Shift to an easier gear on climbs or when you’re riding into the wind. Use a harder gear on flats or if the wind is blowing from behind. When in doubt, shift before the terrain changes. When you shift, ease up on the pedals, especially on hills; if you’re pushing hard, the chain may skip or fall off.
5. Avoid Cross-Chaining
That means the chain is at an extreme slant, either in the big ring up front and the biggest cog in back, or the small ring up front and the small cog in back. This not only stresses the hardware, but it also limits your options if you need to shift again.
6. Cheat Sheet
For: Uphills and headwinds
Use: Small or middle front chainring + bigger rear cogs
For: Downhills
Use: Large front chainring + a range of rear cogs
For: Flat terrain
Use: Small or middle front chainring + smaller rear cogs
Click here for four common shifting situations >>