7 Ways You’re Hurting Your Knees
Cycling is easy on your joints — if you do it right. – By Selene Yeager
One big reason people get into cycling is that it’s a low-impact sport, meaning it’s gentle on your joints. However, it’s also extremely repetitive: Your legs rotate to the tune of 5,000-plus revolutions per hour. Little issues with bike fit or technique compound over time to cause pronounced knee pain, the most common lower-body complaint in our sport. Research shows that more than 40 per cent of recreational riders experience knee pain from overuse at some point or another.
Here’s a look at the most common culprits behind the aches and pains in your hinges—and how to correct them so you can pedal pain-free.
1. You Go from Zero to 100
The number one way cyclists hurt their knees is suddenly riding longer, faster, and/or harder than they have been. Your connective tissues are not conditioned to bear the load you’re putting on them, and your joints get inflamed and pipe up. The solution: Increase your riding mileage or time progressively, by 20 to 25 per cent each week (to a point of course; there are only so many hours).
“Where you need to be most careful is not so much ramping up over a week, but on an individual ride,” says Hunter Allen, founder of a popular coaching group and co-author of Training & Racing with a Power Metre. “If your longest long ride is 60 kilometres, don’t go 120 next week. Instead go 80km, then 85 the next week, then 90, maybe 100.” Be similarly prudent when adding intervals, sprints, and hills. Don’t go from nothing to hill repeats and three sets of Tabatas. And always give yourself a proper warm-up, so your muscles and connective tissues are warm and your synovial fluids (your joints’ natural lubrication) are flowing before you toss down the hammer.
2. You’re Sitting in the Wrong Place
Poor saddle fit can result in stress, pain, and injury. To perform a quick check, place your pedals in the 6-o’clock and 12-o’clock positions and rest your heel on the lower pedal, says pro cyclist Sara Bresnick, also a fit specialist. “Your leg should be straight, which equates to a 20- to 25-degree knee bend when clipped in,” she says. When both feet are positioned parallel to the floor (3 o’clock and 9 o’clock), the forward knee should be over the ball of your foot.
“As a quick rule of thumb, if the front of your knee hurts, try raising the saddle a bit or moving it back in relation to the handlebars. If the back of your knee hurts, try lowering the saddle a bit or moving it forward a bit in relation to the handlebars,” Bresnick says.
“Remember, even moving millimetres can make a big impact, so don’t move your settings too much at one time.” If your knees (or anything else for that matter) hurt despite following a smart riding schedule, have your bike fit dialled by a professional.
3. You Do the Monster Mash
Pushing heavy gears at a low cadence—below 60 to 75 rpm—places a high load through the patella (kneecap) with each pedal stroke. Use your gears to lower the load and increase your cadence to spin above 80 rpm. Bonus: Spinning faster in lower gears has been shown to improve your endurance.
4. You’ve Let Your Core Go Soft (and Weak)
What does your core have to do with your knees? Pretty much everything. Your core, which includes your hips and glutes, forms the platform from which you push off when you’re pedaling. It also keeps you stable in the saddle. When it fatigues, your pedaling mechanics break down.
In one study of 15 competitive cyclists, researchers found that the riders’ legs moved significantly more from side to side, placing more stress on the knee joints and paving the way for pain, following a core-fatiguing workout than when they pedaled with fresh, rested core muscles. Work those core muscles regularly to keep ‘em strong and fatigue resistant.
5. You’re Range of Motion Is MIA
We can debate the merits of stretching for cyclists ‘til we’re blue in the face, but it’s indisputable that if you have poor range of motion, your pedalling may end up causing pain as your kneecap is unable to track in a healthy fashion. Stretching and foam rolling all your major leg muscles can help keep pain at bay. Regular massage will also help break up adhesions and prevent muscles from getting knotted and “stuck.”
6. Your Cleats Need Tweaking
Your foot position has a direct effect on your knees, so it’s essential that your cleats are placed properly. Position your cleats so the ball of your foot is directly over (or even a bit behind, if you’re prone to knee pain) the pedal axle. Your cleat angles should be aligned with the natural angle of your heels, since unnaturally toeing in or out can stress your knees. When adjusting pedal float, more is not better, cautions Bresnick. “Too much float allows the knees to toggle all over the place,” she says, which not only wastes watts, but stresses your joints. Aim for a sweet spot of about 4.5 degrees of float.
RELATED: Quadzilla! 3 Moves To Power Legs
7. You’re Squatting All Wrong
Proper squat form is a topic of ongoing debate. But one thing everyone agrees on is that it’s bad to lean forward and/or put weight on your toes.
“It’s vital that your feet remain flat on the floor—don’t lift your heels—and that you keep your weight over the base of your foot,” says Harvey Newton, a former strength and conditioning advisor. What’s more, partial squats can result in greater stress on the knee than a full squat. “So restricting range of motion may cause, rather than prevent, knee problems,” Newton says.
All images by Skeeze/Pixabay.